More IEC International Electrotechnical Commission Blog

IEC TR 63335:2021-Nuclear power plants-Instrumentation and control systems, IEC TS 62371:2008-Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V, IEC 60364-7-709:2007/AMD1:2012-Amendment 1-Low-voltage electrical installations-Part 7-709: Requirements for special installations or locations-Marinas and similar locations, IEC 61508-1:2010-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 1: General requirements (see Functional Safety and IEC 61508), IEC 63056:2020-Secondary cells and batteries containing alkaline or other non-acid electrolytes-Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems, IEC TS 60034-24:2009-Rotating electrical machines-Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents-Application guide, IEC 63203-201-3:2021-Wearable electronic devices and technologies-Part 201-3: Electronic textile-Determination of electrical resistance of conductive textiles under simulated microclimate, IEC 60335-2-118:2020-Household and similar electrical appliances-Safety-Part 2-118: Particular requirements for professional ice-cream makers, IEC TR 60725:2012-Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ?75 A per phase, IEC TS 62607-4-8:2020-Nanomanufacturing-Key control characteristics-Part 4-8: Nano-enabled electrical energy storage-Determination of water content in electrode nanomaterials. Peruse this IEC 60626-3:2008-Combined flexible materials for electrical insulation-Part 3: Specifications for individual materials for all the details.



IEC 60335-2-76:2018-Household and similar electrical appliances-Safety-Part 2-76: Particular requirements for electric fence energizers, IEC 60809:2014/AMD3:2019-Amendment 3-Lamps for road vehicles-Dimensional, IEC 60999-2:2003-Connecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units-Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included), IEC 60851-5:2008/AMD1:2011-Amendment 1-Winding wires-Test methods-Part 5: Electrical properties, IEC 60601-2-68:2014-Medical electrical equipment-Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, IEC 60601-2-66:2019-Medical electrical equipment-Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems, IEC 60335-2-13:2009-Household and similar electrical appliances-Safety-Part 2-13: Particular requirements for deep fat fryers, 63171:2021-Connectors for electrical and electronic equipment-Shielded or unshielded free and fixed connectors for balanced single-pair data transmission with current-carrying capacity-General requirements and tests, IEC 60027-7:2010-Letter symbols to be used in electrical technology-Part 7: Power generation, IEC 61076-2-111:2017-Connectors for electrical and electronic equipment-Product requirements-Part 2-111: Circular connectors-Detail specification for power connectors with M12 screw-locking. Have a look at this IEC 60034-18-34:2012-Rotating electrical machines-Part 18-34: Functional evaluation of insulation systems-Test procedures for form-wound windings-Evaluation of thermomechanical endurance of insulation systems for official recommendations.



IEC 60335-2-42:2002+AMD1:2008 CSV-Household and similar electrical appliances-Safety-Part 2-42: Particular requirements for commercial electric forced convection ovens, IEC TR 62970:2016-Guidance on how to conduct round robin tests for household and similar electrical appliances, IEC 62542:2013-Environmental standardization for electrical and electronic products and systems-Glossary of terms, IEC 60455-3-2:2003-Resin based reactive compounds used for electrical insulation-Part 3: Specifications for individual materials-Sheet 2: Quartz filled epoxy resinous compounds, IEC 60544-4:2003-Electrical insulating materials-Determination of the effects of ionizing radiation-Part 4: Classification system for service in radiation environments, IEC TR 60878:2015-Graphical symbols for electrical equipment in medical practice, IEC 60335-2-67:2012/AMD1:2016-Amendment 1-Household and similar electrical appliances-Safety-Part 2-67: Particular requirements for floor treatment machines, IEC 62153-1-1:2003-Metallic communication cables test methods-Part 1-1: Electrical-Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT), IEC 61241-1-1 Ed. 2.0-Electrical apparatus for use in the presence of combustible dust-Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation-Specification for apparatus, IEC 60667-1:2020-Vulcanized fibre for electrical purposes-Part 1: Definitions and general requirements. Check out this IEC 60335-2-15:2012-Household and similar electrical appliances-Safety-Part 2-15: Particular requirements for appliances for heating liquids for all the information.



IEC TR 61292-2:2003-Optical amplifier technical reports-Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer, IEC 60809:2014/AMD1:2017-Amendment 1-Lamps for road vehicles-Dimensional, IEC 61234-2:1997-Electrical insulating materials-Methods of test for the hydrolytic stability-Part 2: Moulded thermosets, IEC 60601-1-10:2007/AMD1:2013-Amendment 1-Medical electrical equipment-Part 1-10: General requirements for basic safety and essential performance-Collateral Standard: Requirements for the development of physiologic closed-loop controllers, IEC 63086-1:2020-Household and similar electrical air cleaning appliances-Methods for measuring the performance-Part 1: General requirements, IEC 60601-1-6:2010-Medical electrical equipment-Part 1-6: General requirements for basic safety and essential performance-Collateral standard: Usability, IEC 60670-23:2006-Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 23: Particular requirements for floor boxes and enclosures, IEC 61400-27-1:2015-Wind turbines-Part 27-1: Electrical simulation models-Wind turbines, IEC 60512-28-100:2019-Connectors for electrical and electronic equipment-Tests and measurements-Part 28-100: Signal integrity tests up to 2 000 MHz-Tests 28a to 28g, IEC/IEEE 62582-5:2015-Nuclear power plants-Instrumentation and control important to safety-Electrical equipment condition monitoring methods-Part 5: Optical time domain reflectometry.

Leave a Reply

Your email address will not be published. Required fields are marked *